Samsung Error Code UE

Seeing error UE on your Samsung QuickDrive washer? Don’t fret! This is an all-too-common issue that signals an unbalanced load during the spin cycle. It's like your washing machine is trying to tell you, "Hey, I need some help here!" It’s usually caused by unevenly distributed laundry. When the clothes bunch up on one side of the drum, it throws everything off balance, leading to loud noises and the machine stopping mid-cycle.

But don’t worry; you can easily fix this problem by redistributing your laundry. Here’s how:

**Step 1: Safety First!** Always unplug your washing machine before you start working on it. This keeps you safe from any electrical mishaps.

**Step 2: Open the Door** Carefully open the washer door and take a look inside. If you see clothes piled up on one side, that’s likely the culprit.

**Step 3: Redistribute the Load** Take out the clothes and mix them around in the drum. Make sure you’re spreading heavier items, like towels, evenly throughout. If you have a single heavy item (like a blanket), it’s best to wash it with a few lighter pieces to balance things out.

**Step 4: Restart the Spin Cycle** Once you’ve balanced everything, close the door, plug the machine back in, and select the spin cycle again. Cross your fingers and hope for smooth sailing this time!

**Troubleshooting:** If you still see the UE code after redistributing your laundry, there might be a more serious issue at play, like a problem with the suspension system or shock absorbers. But for most cases, this simple fix works wonders!

**Difficulty Level: Easy** This is a straightforward task that anyone can do without any special skills.

**Estimated Cost:** - DIY: Around $25 for any necessary parts, but usually, this fix doesn’t require any. - Professional: If you need to call in an expert, expect to pay around $150.

**Estimated Time:** You can expect to spend about 30 minutes on this fix, mostly just to ensure you’ve properly redistributed everything.

**Tools Required:** - None are strictly necessary, but a screwdriver and pliers may come in handy if you find that you need to access internal parts later on.

**Safety Warnings:** - Always unplug first before starting any work. - Turn off the water supply to avoid any leaks.

With just a little patience and effort, you can get your washer back to spinning smoothly in no time!

Tools Required

• screwdriver
• pliers

Common Symptoms

• Loud noises during spin
• Machine stops mid-cycle

Technical Information

Root Cause: Unbalanced load during spin cycle.

Related Error Codes

Document ID: samsung-quickdrive-ue-error-fix

Views: 68 | Last Updated: December 7, 2025