Samsung Error Code LE
Leak detected in the washing machine.
| Difficulty Level: | Easy |
| Estimated Time: | 30 minutes |
| Parts Cost (DIY): | $25 |
| Professional Service: | $150 |
| Model Series: | FlexWash |
Seeing error LE on your Samsung FlexWash? I totally understand how frustrating it can be to find water pooling around your washing machine. This error indicates that the machine has detected a leak, which can happen for a few reasons. Don’t worry, though—most leaks are easy to fix with a little troubleshooting!
The LE error typically means there’s a problem with the hoses or connections in your washer. Over time, hoses can wear out or get damaged, leading to leaks. So, let's dig into how you can inspect and fix this issue yourself!
**Step 1: Safety First** Start by unplugging your washing machine and turning off the water supply. Safety is always the top priority!
**Step 2: Inspect the Hoses** Check the water inlet hoses at the back of the machine. Look for any signs of wear or cracks. If you see any damage, it's likely the culprit of the leak. Make sure the connections are tight and secure.
**Step 3: Check the Door Seal** Next, inspect the door seal (also known as the rubber gasket) for any tears or debris. A damaged seal can also cause leaks, especially if you’re washing larger loads.
**Step 4: Replace Damaged Parts** If you find any damaged hoses or seals, replace them. You can find replacement parts at most appliance repair shops or online. For instance, an inlet valve typically costs around $25. Make sure to choose parts that are compatible with your model.
**Step 5: Reassemble and Test** Once you’ve replaced any faulty parts, reassemble everything and turn the water back on. Plug the machine back in and run a test cycle to see if the error persists.
**Difficulty & Cost** This repair is generally on the easier side, perfect for DIY enthusiasts! You can expect to spend around $25 if you’re replacing a simple part like the inlet valve. If you decide to call a professional, the cost could go up to about $150, depending on the extent of the damage and service fees.
**Estimated Time** You should be able to wrap this up in about 30 minutes, especially if you gather your tools beforehand. You’ll need a screwdriver and pliers to help with the repairs.
**Safety Warnings** Remember: always unplug your appliance before starting any repairs and turn off the water supply to prevent any accidents!
With these steps, you should be well on your way to fixing that pesky LE error. Good luck, and feel free to reach out if you have any more questions!
- unplug first
- turn off water
Tools Required
- screwdriver
- pliers
Replacement Parts
| Part Description | Typical Price | Availability |
|---|---|---|
| inlet valve | $25.00 | Find Part → |
Note: Professional service includes parts and labor. Cost: $150
Common Symptoms
- Water pooling around the machine
- Error message displayed on the control panel
Technical Information
Root Cause: Leak detected in the washing machine.
Related Error Codes
Document ID: samsung-flexwash-le-error-fix
Views: 74 | Last Updated: December 7, 2025