Samsung Error Code 3E

Seeing error 3E on your Samsung front load washing machine? I can imagine how frustrating that can be! This error usually points to a motor issue or malfunction, which means your washer isn’t starting as it should. But don’t worry—there are a few steps you can take to troubleshoot this problem before calling in a professional.

First, let’s break down what could be causing the 3E error. In simple terms, it often relates to the motor not receiving the right signals or power. This could be due to loose connections, a faulty motor, or even problems with the control board.

### Step-by-Step Fix: 1. **Unplug Your Washer:** Safety first! Make sure to unplug your washing machine from the power outlet. 2. **Turn Off the Water Supply:** It’s a good idea to turn off the water supply to prevent any leaks while you work. 3. **Access the Motor:** Use a screwdriver to remove the back panel of your washer. This will allow you to access the motor and connections. 4. **Check Connections:** Inspect all the motor connections for any loose wires or signs of wear and tear. Make sure everything is securely connected. 5. **Inspect the Motor:** If you’re comfortable, you can test the motor itself with a multimeter to ensure it’s functioning properly. If you notice any unusual sounds or if it doesn’t run smoothly, it may need to be replaced. 6. **Reassemble and Test:** Once you’ve checked everything, reassemble the back panel, plug the machine back in, and turn the water supply on. Give your washer a test run to see if the error has cleared.

### Difficulty and Cost Estimates: This repair is generally rated as **Medium** in difficulty, especially if you’re not familiar with appliance repairs. If you’re handy, you can complete it in about **30 minutes**. - **DIY Estimated Cost:** Around **$25** for potentially needed parts like a new inlet valve. - **Professional Help Estimated Cost:** If you decide to call in a technician, expect to pay around **$150**.

### Tools Required: - Screwdriver - Pliers

### Parts Needed: - Inlet valve ($25)

### Safety Warnings: - Always unplug the machine first. - Don’t forget to turn off the water supply.

There you go! With a little patience and some basic tools, you can tackle the 3E error on your Samsung washer. If the problem persists after these steps, it might be time to reach out to a professional for further assistance. Good luck, and happy washing!

Tools Required

• screwdriver
• pliers

Replacement Parts

Note: Professional service includes parts and labor. Cost: $150

Common Symptoms

• Washing machine not starting
• Error message displayed on the control panel

Technical Information

Root Cause: Motor issue or malfunction.

Related Error Codes

Document ID: samsung-front-load-3e-error-fix

Views: 78 | Last Updated: December 7, 2025