Samsung Error Code C8

Seeing error C8 on your Samsung QuickDrive? Don’t worry; you’re not alone! This pesky error indicates that your washing machine has detected an overload in the drum. Essentially, it means you’ve packed in more laundry than it can handle, which can prevent the drum from spinning properly. Let’s walk through how to fix this issue together.

### Why Is This Happening? The C8 error code is your washer's way of saying, "Help! I can’t spin!" When the drum is overloaded, it can strain the motor and other components, leading to potential damage. The good news is that fixing this is typically straightforward.

### Step-by-Step Fix 1. **Turn Off the Washer**: Before you do anything, make sure to unplug your machine. Safety first! 2. **Open the Door**: Gently open the door of your washer and take a look inside. 3. **Check the Load**: Assess how much laundry is in the drum. As a rule of thumb, most washing machines can handle about 6-8 kg (13-17 lbs) of laundry, but always refer to your user manual for the specific capacity of your model. 4. **Remove Excess Laundry**: If you see that the drum is packed tight, start removing clothes until you’re down to a manageable load. It’s better to wash smaller loads than risk damaging your machine. 5. **Restart the Cycle**: Once you’ve reduced the load, close the door securely, plug your washer back in, and restart the washing cycle. 6. **Monitor for Any Issues**: Keep an eye on the washer to ensure it starts spinning normally and the error doesn’t come back.

### Difficulty and Cost Estimates This fix is truly easy, making it a perfect DIY project. You won’t need any special tools apart from maybe a screwdriver if you need to remove a panel (which is rarely the case).

- **Estimated Cost (DIY)**: $0 if you just need to reduce the load, $25 if you ever need parts like an inlet valve in the future. - **Estimated Cost (Professional)**: $150, if you decide to call in a pro for any repairs. - **Estimated Time**: You should be able to resolve this issue in about 30 minutes.

### Tools and Parts - **Tools Required**: None, but a screwdriver and pliers might help if you need to access internal parts. - **Parts Needed**: Typically none, but keep in mind that an inlet valve can cost around $25 if you ever need a replacement.

### Safety Warnings - Always unplug the washer before starting any sort of inspection or repair. - Turn off the water supply to your washer to avoid any leaks.

And that’s it! With just a little patience and a few steps, you should have your Samsung QuickDrive up and running again. If the error persists after reducing the load, it might be time to reach out to a professional for more help. Happy washing!

Common Symptoms

• Drum not spinning
• Error message indicating overload

Technical Information

Root Cause: Overload detection; the drum is overloaded beyond the maximum capacity.

Related Error Codes

Document ID: samsung-quickdrive-c8-error-fix

Views: 28 | Last Updated: December 9, 2025